MCP2561/2FD
High-Speed CAN Flexible Data Rate Transceiver
Features:
• Optimized for CAN FD (Flexible Data rate) at 2, 5...
MCP2561/2FD
High-Speed CAN Flexible Data Rate Transceiver
Features:
Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation - Maximum Propagation Delay: 120 ns - Loop Delay Symmetry: -10%/+10% (2 Mbps)
Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements
Very Low Standby Current (5 µA, typical) VIO Supply Pin to Interface Directly to
CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes CAN Bus Pins are Disconnected when Device is Unpowered - An Unpowered Node or Brown-Out Event will
Not Load the CAN Bus Detection of Ground Fault:
- Permanent Dominant Detection on TXD
- Permanent Dominant Detection on Bus Power-on Reset and
Voltage Brown-Out
Protection on VDD Pin Protection Against Damage Due to Short-Circuit
Conditions (Positive or Negative Battery
Voltage) Protection Against High-
Voltage Transients in
Automotive Env...