Order this document by MC12015/D
Dual Modulus Prescaler
The MC12015, MC12016 and MC12017 are dual modulus prescalers wh...
Order this document by MC12015/D
Dual Modulus Prescaler
The MC12015, MC12016 and MC12017 are dual modulus prescalers which will drive divide by 32 and 33, 40 and 41, and 64 and 65, respectively. An internal regulator is provided to allow these devices to be used over a wide range of power–supply
voltages. The devices may be operated by applying a supply
voltage of 5.0 Vdc ±10% at Pin 7, or by applying an unregulated
voltage source from 5.5Vdc to 9.5 Vdc to Pin 8.
MC12015 MC12016 MC12017
MECL PLL COMPONENTS DUAL MODULUS PRESCALER
SEMICONDUCTOR TECHNICAL DATA
225 MHz Toggle Frequency Low–Power 7.5 mA Maximum at 6.8 V Control Input and Output Are Compatible With Standard
CMOS Connecting Pins 2 and 3 Allows Driving One TTL Load Supply
Voltage 4.5 V to 9.5 V
8 1
P SUFFIX PLASTIC PACKAGE CASE 626
SIMPLIFIED BLOCK DIAGRAM
Control Input TO Vreg
8 1
1 Signal Input Signal GND 0.001µF 5 6 0.001µF Vreg 7 0.1µF
÷N / N+1
2 Active Pullup 3 Output
D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8)
4
GND Device
Voltage Regulator
ORDERING INFORMATION
Operating Temperature Range Package
VCC 8 0.1µF
MC12015D MC12016D MC12017D TA = –40° to +85°C Plastic SO–8
1. Vreg at Pin 7 is not guaranteed to be between 4.5 and 5.5V when VCC is being applied to Pin 8 2. Pin 7 is not to be used as a source of regulated output
voltage
MC12015P MC12016P MC12017P
© Motorola, Inc. 1997
Rev 2
MC12015 MC12016 MC12017
MAXIMUM RATINGS [tblhead]
Rating Regulated
Voltage, Pin 7 Power Supply
Voltage, ...