MC100EP116

www.DataSheet4U.com MC10EP116, MC100EP116 3.3 V / 5 V Hex Differential Line Receiver/Driver Description The MC10EP116/100EP116 is a 6-bit differential line receiver based on the EP16 device. The 3.0 GHz bandwidth provided by the high frequency outputs makes the device ideal for buffering of very high speed oscillators. The VBB pin, an internally generated voltage supply, is available to this device only. For single−ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 mF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. The design incorporates two stages of gain, internal to the device, making it an excellent choice for use in high bandwidth amplifier applications. The differential inputs have internal clamp structures which will force the Q output of a gate in an open input condition to go to a LOW state. Thus, inputs of unused gates can be left open and will not affect the operation of the rest of the device. Note that the input clamp will take affect only if both inputs fall 2.5 V below VCC. The 100 Series contains temperature compensation. Features http://onsemi.com MARKING DIAGRAM* MCxxx EP116 AWLYYWWG LQFP−32 FA SUFFIX CASE 873A 1 1 32 QFN32 MN SUFFIX CASE 488AM xxx A WL, L YY, Y WW, W G or G MCxxx EP116 AWLYYWWG G 260 ps Typical Propagation Delay Maximum Frequency > 3 GHz T...