MBRS2040LT3

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MBRS2040LT3/D Advance Information Surface Mount Schottky Power Rectifier SMB Power Surface Mount Package . . . employing the Schottky Barrier principle in a metal–to–silicon power rectifier. Features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency switching power supplies; free wheeling diodes and polarity protection diodes. Compact Package with J–Bend Leads Ideal for Automated Handling Highly Stable Oxide Passivated Junction Guardring for Over–Voltage Protection Low Forward Voltage Drop MBRS2040LT3 SCHOTTKY BARRIER RECTIFIER 2.0 AMPERES 40 VOLTS Mechanical Characteristics: Case: Molded Epoxy Epoxy Meets UL94, VO at 1/8″ Weight: 95 mg (approximately) Maximum Temperature of 260°C / 10 Seconds for Soldering Polarity: Notch in Plastic Body Indicates Cathode Lead Available in 12 mm Tape, 2500 Units per 13 inch Reel, Add “T3” Suffix to Part Number Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Marking: BKJL MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TC = 103°C) Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz, TC = 104°C) Non–Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Storage / Operating Case Tem...