MBRS140LT3

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MBRS140LT3/D Advance Information Surface Mount Schottky Power Rectifier SMB Power Surface Mount Package . . . employing the Schottky Barrier principle in a metal–to–silicon power rectifier. Features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency switching power supplies; free wheeling diodes and polarity protection diodes. Compact Package with J–Bend Leads Ideal for Automated Handling Highly Stable Oxide Passivated Junction Guardring for Over–Voltage Protection Low Forward Voltage Drop MBRS140LT3 SCHOTTKY BARRIER RECTIFIER 1.0 AMPERES 40 VOLTS Mechanical Characteristics: Case: Molded Epoxy Epoxy Meets UL94, VO at 1/8″ Weight: 95 mg (approximately) Polarity: Notch in Plastic Body Indicates Cathode Lead Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Available in 12 mm Tape, 2500 Units per 13″ Reel, Add “T3” Suffix to Part Number Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Marking: B14L MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TC = 110°C) Peak Repetitive Forward Current (At Rated VR, Square Wave, 100 kHz, TC = 110°C) Non–Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) S...