MBRS130

MOTOROLA Designer's SEMICONDUCTOR TECHNICAL DATA Order this document by MBRS130LT3/D Schottky Power Rectifier Surface Mount Power Package . . . Employs the Schottky Barrier principle in a large area metal–to–silicon power diode. State–of–the–art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes, in surface mount applications where compact size and weight are critical to the system. Very Low Forward Voltage Drop (0.395 Volts Max @ 1.0 A, TJ = 25°C) Small Compact Surface Mountable Package with J–Bend Leads Highly Stable Oxide Passivated Junction Guardring for Stress Protection ™ Data Sheet MBRS130LT3 Motorola Preferred Device SCHOTTKY BARRIER RECTIFIER 1.0 AMPERE 30 VOLTS Mechanical Characteristics Case: Epoxy, Molded Weight: 95 mg (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Shipped in 12 mm Tape and Reel, 2500 units per reel Polarity: Notch in Plastic Body Indicates Cathode Lead Marking: B130 CASE 403A–03 MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current TL = 120°C TL = 110°C Symbol VRRM VRWM VR IF(AV) IFSM TJ Value 30 Unit Volts 1.0 2.0 40 – 65 to +125 Amps...