LOW-POWER PLL FREQUENCY SYNTHESIZER
www.DataSheet4U.com
Sept. 1995 Edition 1.0a DATA SHEET
MB1503
LOW-POWER PLL FREQUENCY SYNTHESIZER WITH POWER SAVE FUNC...
Description
www.DataSheet4U.com
Sept. 1995 Edition 1.0a DATA SHEET
MB1503
LOW-POWER PLL FREQUENCY SYNTHESIZER WITH POWER SAVE FUNCTION (1.1GHz)
The Fujitsu MB1503 is a serial input phase-locked loop (PLL) frequency synthesizer with a pulse-swallow function. A stand-by mode is provided to limit power consumption during intermittent operation. The MB1503 is configured of a 1.1GHz dual-modulus prescaler with 128/129 divide ratio, control signal generator, 16-bit shift register, 15-bit latch, programmable reference divider (binary 14-bit programmable reference counter), 1-bit switch counter, phase comparator with phase conversion function, charge pump, crystal oscillator, 19-bit shift register, 18-bit latch, programmable divider (binary 7-bit swallow counter and binary 11-bit programmable counter), analog switches, and an intermittent operation control circuit that selects the operating or stand-by mode depending on the power-save control input state (PS). The MB1503 operates from a single +5 V supply. Fujitsu’s advanced technology achieves an Icc of 8mA, typical. The stand-by mode current consumption is just 100µA.
Features
– – – – : fIN = 1.1GHz (PIN = –10dBm) : High-speed dual-modulus prescaler with 128/129 divide ratio Low supply current : ICC = 8mA typ. at 5V Power-saving stand-by mode : 100µA Serial input, 18-bit programmable divider consisting of: Binary 7-bit swallow counter : 0 to 127 Binary 11-bit programmable counter : 16 to 2,047 Serial input 15-bit program...
Similar Datasheet