MAX5232

19-2331; Rev 1; 9/03 3V/5V, 10-Bit, Serial Voltage-Output Dual DACs with Internal Reference General Description The MAX5232/MAX5233 low-power, dual 10-bit voltageoutput digital-to-analog converters (DACs) feature an internal 10ppm/°C precision bandgap voltage reference and precision output amplifiers. The MAX5233 operates on a single 5V supply with an internal 2.465V reference and features a 4.092V full-scale output range. The MAX5232 operates on a single 3V supply with an internal 1.234V reference and features a 2.046V full-scale output range. The MAX5233 consumes only 470µA while the MAX5232 consumes only 420µA of supply current. Both devices feature low-power (2µA) software- and hardware-enabled shutdown modes. The MAX5232/MAX5233 feature a 13.5MHz SPI™-, QSPI™-, and MICROWIRE™-compatible 3-wire serial interface. An additional data output (DOUT) allows for daisy-chaining and read back. Each DAC has a doublebuffered digital input. The MAX5232/MAX5233 feature two software-selectable shutdown output impedances: 1kΩ or 200kΩ. A power-up reset feature sets DAC outputs at ground or at the midscale DAC code. The MAX5232/MAX5233 are specified over the extended temperature range (-40°C to +85°C) and are available in 16-pin QSOP packages. Features o Internal 10ppm/°C Precision Bandgap Reference 2.465V (MAX5233) 1.234V (MAX5232) o 30ppm/°C (max) Full-Scale Output Range 4.092V (MAX5233) 2.046V (MAX5232) o Single-Supply Operation 5V (MAX5233) 3V (MAX5232) o Low Supply Current 470µA (...