DatasheetsPDF.com

MAX5101 Datasheet

Part Number MAX5101
Manufacturers Maxim
Logo Maxim
Description +2.7V to +5.5V / Low-Power / Triple / Parallel 8-Bit DAC
Datasheet MAX5101 DatasheetMAX5101 Datasheet (PDF)

19-1560; Rev 0; 10/99 +2.7V to +5.5V, Low-Power, Triple, Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs General Description The MAX5101 parallel-input, voltage-output, triple 8-bit digital-to-analog converter (DAC) operates from a single +2.7V to +5.5V supply and comes in a space-saving 16-pin TSSOP package. Internal precision buffers swing Rail-to-Rail®. For all three DACs, the internal reference voltage is tied to VDD. The MAX5101 has separate input latches for each of its three DACs. D.

  MAX5101   MAX5101






Part Number MAX5109
Manufacturers Maxim Integrated Products
Logo Maxim Integrated Products
Description 8-Bit DACs
Datasheet MAX5101 DatasheetMAX5109 Datasheet (PDF)

19-3585; Rev 0; 2/05 www.DataSheet4U.com Nonvolatile, Dual, 8-Bit DACs with 2-Wire Serial Interface General Description The MAX5109 dual 8-bit digital-to-analog converters (DACs) feature nonvolatile registers. These nonvolatile registers store the DAC operating modes and output states, allowing the DACs to initialize to specified configurations at power-up. Precision on-chip output buffers swing rail-to-rail, and provide 8µs settling time. The I2C*-compatible, 2-wire serial interface allows fo.

  MAX5101   MAX5101







Part Number MAX5106
Manufacturers Maxim
Logo Maxim
Description Nonvolatile / Quad / 8-Bit DACs
Datasheet MAX5101 DatasheetMAX5106 Datasheet (PDF)

19-1925; Rev 1; 6/01 Nonvolatile, Quad, 8-Bit DACs General Description The MAX5105/MAX5106 nonvolatile, quad, 8-bit digitalto-analog converters (DACs) operate from a single +2.7V to +5.5V supply. An internal EEPROM stores the DAC states even after power is removed. Data from these nonvolatile registers automatically initialize the DAC outputs and operating states during power-up. Precision internal buffers swing Rail-to-Rail®, and the reference input range includes both ground and the positive .

  MAX5101   MAX5101







Part Number MAX5105
Manufacturers Maxim
Logo Maxim
Description Nonvolatile / Quad / 8-Bit DACs
Datasheet MAX5101 DatasheetMAX5105 Datasheet (PDF)

19-1925; Rev 1; 6/01 Nonvolatile, Quad, 8-Bit DACs General Description The MAX5105/MAX5106 nonvolatile, quad, 8-bit digitalto-analog converters (DACs) operate from a single +2.7V to +5.5V supply. An internal EEPROM stores the DAC states even after power is removed. Data from these nonvolatile registers automatically initialize the DAC outputs and operating states during power-up. Precision internal buffers swing Rail-to-Rail®, and the reference input range includes both ground and the positive .

  MAX5101   MAX5101







Part Number MAX5104
Manufacturers Maxim
Logo Maxim
Description Low-Power / Dual / Voltage-Output / 12-Bit DAC with Serial Interface
Datasheet MAX5101 DatasheetMAX5104 Datasheet (PDF)

19-1587; Rev 0; 11/99 Low-Power, Dual, Voltage-Output, 12-Bit DAC with Serial Interface General Description The MAX5104 low-power, serial, voltage-output, dual 12-bit digital-to-analog converter (DAC) consumes only 500µA from a single +5V supply. This device features Rail-to-Rail® output swing and is available in a spacesaving 16-pin QSOP package. To maximize the dynamic range, the DAC output amplifiers are configured with an internal gain of +2V/V. The 3-wire serial interface is SPI™/QSPI™/MIC.

  MAX5101   MAX5101







Part Number MAX5102
Manufacturers Maxim
Logo Maxim
Description +2.7V to +5.5V / Low-Power / Dual / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs
Datasheet MAX5101 DatasheetMAX5102 Datasheet (PDF)

19-1565; Rev 0; 10/99 +2.7V to +5.5V, Low-Power, Dual, Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs General Description The MAX5102 parallel-input, voltage-output, dual 8-bit digital-to-analog converter (DAC) operates from a single +2.7V to +5.5V supply and comes in a space-saving 16-pin TSSOP package. Internal precision buffers swing Rail-to-Rail ® , and the reference input range includes both ground and the positive rail. Both DACs share a common reference input. The MAX5102 has separ.

  MAX5101   MAX5101







+2.7V to +5.5V / Low-Power / Triple / Parallel 8-Bit DAC

19-1560; Rev 0; 10/99 +2.7V to +5.5V, Low-Power, Triple, Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs General Description The MAX5101 parallel-input, voltage-output, triple 8-bit digital-to-analog converter (DAC) operates from a single +2.7V to +5.5V supply and comes in a space-saving 16-pin TSSOP package. Internal precision buffers swing Rail-to-Rail®. For all three DACs, the internal reference voltage is tied to VDD. The MAX5101 has separate input latches for each of its three DACs. Data is transferred to the input latches from a common 8-bit input port. The DACs are individually selected through address inputs A0 and A1 and are updated by bringing WR low. The MAX5101 features a 1µA software shutdown mode, as well as a power-on reset mode that resets all registers to code 00 hex on power-up. o Ultra-Low Supply Current 0.3mA while Operating 1µA in Software Shutdown Mode o Ultra-Small 16-Pin TSSOP Package o Output Buffer Amplifiers Swing Rail-to-Rail o Power-On Reset Sets All Registers to Zero Features o +2.7V to +5.5V Single-Supply Operation MAX5101 Applications Digital Gain and Offset Adjustment Programmable Attenuators Portable Instruments Power-Amp Bias Control PART MAX5101AEUE MAX5101BEUE Ordering Information TEMP. RANGE -40°C to +85°C -40°C to +85°C PINPACKAGE 16 TSSOP 16 TSSOP INL (LSB) ±1 ±2 Functional Diagram TOP VIEW INPUT LATCH A DAC A OUTA Pin Configuration OUTB 1 OUTA 2 D0–D7 INPUT LATCH B DAC B OUTB 16 OUTC 15 GND 14 A0 VDD 3 WR 4 MAX5101 13 .


2005-04-29 : MC44251    MC44250    MST4110C    STR5412    SDA2008    SDA20000    LM121SS1T53    M383L2828ET1    M383L2920BTS-A2    M383L2920BTS-CAA   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)