1Gbps to 10Gbps Preemphasis Driver
www.DataSheet4U.com
19-0868; Rev 0; 7/07
1Gbps to 10Gbps Preemphasis Driver with Receive Equalizer
General Description
...
Description
www.DataSheet4U.com
19-0868; Rev 0; 7/07
1Gbps to 10Gbps Preemphasis Driver with Receive Equalizer
General Description
The MAX3984 is a single-channel, preemphasis driver with input equalization that operates from 1Gbps to 10.3Gbps. It provides compensation for copper links, such as 8.5Gbps Fibre Channel and 10.3Gbps Ethernet, allowing spans of up to 10m with 24 AWG cable. The driver provides four selectable preemphasis levels, and the selectable input equalizer compensates for up to 10in of FR-4 circuit board material at 10Gbps. The MAX3984 also features SFP-compliant loss-of-signal (LOS) detection and TX_DISABLE. Selectable output swing reduces EMI and power consumption. The MAX3984 is packaged in a lead-free, 3mm x 3mm, 16-pin thin QFN and operates from a 0°C to +85°C temperature range. ♦ Drives Up to 10m of 24 AWG Cable ♦ Drives Up to 30in of FR-4 ♦ Selectable 1000mVP-P or 1200mVP-P Differential Output Swing ♦ Selectable Output Preemphasis ♦ Selectable Input Equalization ♦ LOS Detection with Built-In Squelch ♦ Transmit Disable ♦ Hot Pluggable
Features
MAX3984
Applications
8.5Gbps Fibre Channel 10.3Gbps Ethernet Active Cable Assemblies STM-64
PART MAX3984UTE+
Ordering Information
TEMP RANGE PIN-PACKAGE PKG CODE T1633F-3
0°C to +85°C 16 Thin QFN-EP*
Pin Configuration appears at end of data sheet.
+Denotes a lead-free package. *EP = Exposed pad.
Typical Operating Circuits
DISK ENCLOSURE ACTIVE CABLE ASSEMBLY FABRIC SWTCH ≤ 5V RPULLUP ≥ 4.7kΩ LOS PE0 LOS PE1 COPPER C...
Similar Datasheet