MAX3942

www.DataSheet4U.com 19-2934; Rev 1; 6/07 10Gbps Modulator Driver General Description The MAX3942 is designed to drive high-speed optical modulators at data rates up to 10.7Gbps. It functions as a modulation circuit, with an integrated control op amp externally programmed by a DC voltage. A high-bandwidth, fully differential signal path is internally implemented to minimize jitter accumulation. When a clock signal is available, the integrated data-retiming function can be selected to reject input-signal jitter. The MAX3942 receives differential CML signals (groundreferenced) with on-chip line terminations of 50Ω. Each of the differential outputs has an on-chip 50Ω resistor for back termination. The driver is able to deliver a modulation current of 40mA P-P to 120mA P-P, with an edge speed of 23ps (typical 20% to 80%). This modulation current reflects a modulation voltage of 1.0VP-P to 3.0VPP single ended or 2.0VP-P to 6.0VP-P differential. The MAX3942 also includes an adjustable pulse-width control circuit to precompensate for asymmetrical modulator characteristics. It is available in a compact 4mm ✕ 4mm, 24-pin thin QFN package and operates over the -40°C to +85°C temperature range. ♦ 23ps Edge Speed ♦ Single-Ended Modulation Voltage Up to 3VP-P ♦ Differential Modulation Voltage Up to 6VP-P ♦ Selectable Data-Retiming Latch ♦ Up to 10.7Gbps Operation ♦ 50Ω On-Chip Input and Output Terminations ♦ Pulse-Width Adjustment ♦ Enable and Polarity Controls ♦ ESD Protection Features ...