Upstream CATV Amplifier
19-1700; Rev 0; 4/00
UAL IT MAN TION K A ET U E L H A S EV TA WS DA FOLLO
Upstream CATV Amplifier
Features
o Ultra-Low...
Description
19-1700; Rev 0; 4/00
UAL IT MAN TION K A ET U E L H A S EV TA WS DA FOLLO
Upstream CATV Amplifier
Features
o Ultra-Low Power-Up/Down Transients, 25mV (typ) at 66dBmV Output o Single-Supply Operation o Output Level Ranges from <12dBmV to 67dBmV (QPSK) o Gain Programmable in 1dB Steps o Low Transmit Output Noise Floor: -41dBmV (160kHz BW) o Low Transmit-Disable Output Noise: -70dBmV o Shutdown Mode
General Description
The MAX3509 is a programmable power amplifier for use in CATV upstream applications. The device outputs up to 66dBmV QPSK through a 1:1 transformer. It features variable gain controlled by a 3-wire digital serial bus. Gain control is available in 1dB steps. The device operates over a 5MHz to 65MHz frequency range. The MAX3509 offers a transmit-disable mode, which places the device in a high-isolation state for use between bursts in TDMA systems. In this mode, all analog functions are shut down, minimizing output noise and power consumption. When entering and leaving transmit-disable mode, transients are kept to 25mV nominal at full gain. In addition, supply current is reduced to 7.8mA. An additional power-down mode is available. Shutdown mode disables all circuitry and reduces current consumption to less than 1µA. The MAX3509 is available in a 20-pin TSSOP-EP package for the extended-industrial temperature range (-40°C to +85°C).
MAX3509†
Ordering Information
PART MAX3509EUP *Exposed paddle TEMP. RANGE -40°C to +85°C PIN-PACKAGE 20 TSSOP-EP*
Applications
Tel...
Similar Datasheet