DatasheetsPDF.com

MAX2314 Datasheet

Part Number MAX2314
Manufacturers Maxim
Logo Maxim
Description CDMA IF VGAs and I/Q Demodulators
Datasheet MAX2314 DatasheetMAX2314 Datasheet (PDF)

19-1507; Rev 0a; 8/99 L MANUA ION KIT HEET T A U L EVA TA S WS DA FOLLO CDMA IF VGAs and I/Q Demodulators with VCO and Synthesizer Features o Complete IF Subsystem Includes VCO and Synthesizer o Supports Dual-Band, Triple-Mode Operation o VGA with >110dB Gain Control o Quadrature Demodulator o High Output Level (2.7V) o Programmable Charge-Pump Current o Supports Any IF Frequency Between 40MHz and 300MHz o 3-Wire Programmable Interface o Low Supply Voltage (+2.7V) General Description The MAX2.

  MAX2314   MAX2314






Part Number MAX2316
Manufacturers Maxim Integrated
Logo Maxim Integrated
Description CDMA IF VGAs and I/Q Demodulators
Datasheet MAX2314 DatasheetMAX2316 Datasheet (PDF)

MAX2310/MAX2312/MAX2314/MAX2316 19-1507; Rev 2; 6/07 EVAALVUAAILTAIOBNLEKIT CDMA IF VGAs and I/Q Demodulators with VCO and Synthesizer General Description The MAX2310/MAX2312/MAX2314/MAX2316 are IF receivers designed for dual-band, dual-mode, and single-mode N-CDMA and W-CDMA cellular phone systems. The signal path consists of a variable gain amplifier (VGA) and I/Q demodulator. The devices feature guaranteed +2.7V operation, a dynamic range of over 110dB, and high input IP3 (-33dBm at 35dB g.

  MAX2314   MAX2314







Part Number MAX2312
Manufacturers Maxim Integrated
Logo Maxim Integrated
Description CDMA IF VGAs and I/Q Demodulators
Datasheet MAX2314 DatasheetMAX2312 Datasheet (PDF)

MAX2310/MAX2312/MAX2314/MAX2316 19-1507; Rev 2; 6/07 EVAALVUAAILTAIOBNLEKIT CDMA IF VGAs and I/Q Demodulators with VCO and Synthesizer General Description The MAX2310/MAX2312/MAX2314/MAX2316 are IF receivers designed for dual-band, dual-mode, and single-mode N-CDMA and W-CDMA cellular phone systems. The signal path consists of a variable gain amplifier (VGA) and I/Q demodulator. The devices feature guaranteed +2.7V operation, a dynamic range of over 110dB, and high input IP3 (-33dBm at 35dB g.

  MAX2314   MAX2314







Part Number MAX2310
Manufacturers Maxim
Logo Maxim
Description CDMA IF VGAs and I/Q Demodulators
Datasheet MAX2314 DatasheetMAX2310 Datasheet (PDF)

MAX2310/MAX2312/MAX2314/MAX2316 19-1507; Rev 2; 6/07 EVAALVUAAILTAIOBNLEKIT CDMA IF VGAs and I/Q Demodulators with VCO and Synthesizer General Description The MAX2310/MAX2312/MAX2314/MAX2316 are IF receivers designed for dual-band, dual-mode, and single-mode N-CDMA and W-CDMA cellular phone systems. The signal path consists of a variable gain amplifier (VGA) and I/Q demodulator. The devices feature guaranteed +2.7V operation, a dynamic range of over 110dB, and high input IP3 (-33dBm at 35dB g.

  MAX2314   MAX2314







Part Number MAX231
Manufacturers Maxim Integrated Products
Logo Maxim Integrated Products
Description (MAX220 - MAX249) +5V-Powered / Multichannel RS-232 Drivers/Receivers
Datasheet MAX2314 DatasheetMAX231 Datasheet (PDF)

MAX220–MAX249 +5V-Powered, Multichannel RS-232 Drivers/Receivers General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. The MAX225, MAX233, MAX235, and MAX245/MAX246/ MAX247 use no external components and are recommended for applications where printed circuit board space is critical. The MAX220-MAX249 are offered in 26 different packages with temperat.

  MAX2314   MAX2314







CDMA IF VGAs and I/Q Demodulators

19-1507; Rev 0a; 8/99 L MANUA ION KIT HEET T A U L EVA TA S WS DA FOLLO CDMA IF VGAs and I/Q Demodulators with VCO and Synthesizer Features o Complete IF Subsystem Includes VCO and Synthesizer o Supports Dual-Band, Triple-Mode Operation o VGA with >110dB Gain Control o Quadrature Demodulator o High Output Level (2.7V) o Programmable Charge-Pump Current o Supports Any IF Frequency Between 40MHz and 300MHz o 3-Wire Programmable Interface o Low Supply Voltage (+2.7V) General Description The MAX2310/MAX2312/MAX2314/MAX2316 are IF receivers designed for dual-band, dual-mode, and single-mode N-CDMA and W-CDMA cellular phone systems. The signal path consists of a variable gain amplifier (VGA) and I/Q demodulator. The devices feature guaranteed +2.7V operation, a dynamic range of over 110dB, and high input IP3 (-33dBm at 35dB gain, 1.7dBm at -35dB). Unlike similar devices, the MAX2310 family of receivers includes dual oscillators and synthesizers to form a self-contained IF subsystem. The synthesizer’s reference and RF dividers are fully programmable through a 3-wire serial bus, enabling dual-band system architectures using any common reference and IF frequency. The differential baseband outputs have enough bandwidth to suit both N-CDMA and W-CDMA systems, and offer saturated output levels of 2.7Vp-p at a low +2.75V supply voltage. Including the low-noise voltage-controlled oscillator (VCO) and synthesizer, the MAX2310 draws only 26mA from a +2.75V supply in CDMA (differential IF).


2005-05-06 : M68AW031AL70N6U    M68AW031AL70NS6U    M68AW031AM70MS6U    M68AW031AM70N6U    M68AW031AM70NS6U    M68AW064F    M68AW127    M68AW127B    M68AW128M    M68AW511A   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)