19-1465; Rev 1; 7/99
Advanced Lithium-Ion Battery-Pack Protector
General Description
The MAX1666 provides complete prot...
19-1465; Rev 1; 7/99
Advanced Lithium-Ion Battery-Pack Protector
General Description
The MAX1666 provides complete protection against over
voltage, under
voltage, overcharge current, overdischarge current, and cell mismatch for 2-cell to 4-cell Lithium-Ion battery packs. The
voltage of each cell in the battery pack is checked and compared to the programmable threshold and to the other cells in the pack. The MAX1666 protects the battery pack in an overcurrent condition by disconnecting the pack from the load at a programmable limit. On-chip power
MOSFET drivers control external P-channel
MOSFETs to disconnect the cells from external terminals when faults occur. The MAX1666 employs a unique timing scheme that allows three modes of operation, for optimal performance and battery power conservation. The MAX1666 can operate in a stand-alone configuration or in conjunction with a microcontroller. It is available in three versions: the “S” version monitors two Li-Ion cells, the “V” version monitors three cells, and the “X” version monitors four cells.
Features
o Over
voltage Protection Programmable Limits from +4.0V to +4.4V Accurate to ±0.5% o Under
voltage Protection Programmable Limits from +2.0V to +3.0V Accurate to ±2.5% o Cell Mismatch Protection Programmable Limits from 0 to 500mV Accurate to ±10% o Overcharge Current Protection o Overdischarge Current Protection o Low Operating Supply Current: 30µA typ o Low Standby Current: 1µA max o +28V max Input
Voltage o Available in Small...