DatasheetsPDF.com

MAX1446 Datasheet

Part Number MAX1446
Manufacturers Maxim
Logo Maxim
Description 10-Bit / 60Msps / 3.0V / Low-Power ADC
Datasheet MAX1446 DatasheetMAX1446 Datasheet (PDF)

19-1729; Rev 1; 7/03 KIT ATION EVALU E L B A IL AVA 10-Bit, 60Msps, 3.0V, Low-Power ADC with Internal Reference General Description Features o Single 3.0V Operation o Excellent Dynamic Performance 59.5dB SNR at fIN = 20MHz 73dB SFDR at fIN = 20MHz o Low Power: 30mA (Normal Operation) 5µA (Shutdown Mode) o Fully Differential Analog Input o Wide 2Vp-p Differential Input Voltage Range o 400MHz -3dB Input Bandwidth o On-Chip 2.048V Precision Bandgap Reference o CMOS-Compatible Three-State Outputs .

  MAX1446   MAX1446






Part Number MAX1449
Manufacturers Maxim
Logo Maxim
Description 10-Bit / 105Msps / Single +3.3V / Low-Power ADC
Datasheet MAX1446 DatasheetMAX1449 Datasheet (PDF)

19-4802; Rev 0; 10/00 ILABLE N KIT AVA EVALUATIO 10-Bit, 105Msps, Single +3.3V, Low-Power ADC with Internal Reference General Description The MAX1449 +3.3V, 10-bit analog-to-digital converter (ADC) features a fully differential input, a pipelined 10stage ADC architecture with wideband track-and-hold (T/H), and digital error correction incorporating a fully differential signal path. The ADC is optimized for lowpower, high-dynamic performance in imaging and digital communications applications. T.

  MAX1446   MAX1446







Part Number MAX14483
Manufacturers Maxim Integrated
Logo Maxim Integrated
Description SPI Digital Isolator
Datasheet MAX1446 DatasheetMAX14483 Datasheet (PDF)

MAX14483 6-Channel, Low-Power, 3.75kVRMS, SPI Digital Isolator General Description The MAX14483 is a 6-channel, 3.75kVRMS digital galvanic isolator using Maxim’s proprietary process technology. The six signal channels are individually optimized for SPI applications and include very low propagation delay on the SDI, SDO, and SCLK channels. The SDO channel’s tri-state control is enabled by the CS input as well as a second enable control input pin (SDOEN), allowing a single MAX14483 to isolate mu.

  MAX1446   MAX1446







Part Number MAX1448
Manufacturers Maxim Integrated Products
Logo Maxim Integrated Products
Description Low-Power ADC
Datasheet MAX1446 DatasheetMAX1448 Datasheet (PDF)

www.DataSheet4U.com 19-5400; Rev 2; 5/04 KIT ATION EVALU E L B A IL AVA 10-Bit, 80Msps, Single 3.0V, Low-Power ADC with Internal Reference General Description The MAX1448 3V, 10-bit analog-to-digital converter (ADC) features a fully differential input, a pipelined 10stage ADC architecture with wideband track-and-hold (T/H), and digital error correction incorporating a fully differential signal path. The ADC is optimized for lowpower, high dynamic performance in imaging and digital communicati.

  MAX1446   MAX1446







Part Number MAX1447
Manufacturers Maxim Integrated Products
Logo Maxim Integrated Products
Description Single-Chip ADCs
Datasheet MAX1446 DatasheetMAX1447 Datasheet (PDF)

19-3166; Rev 0; 1/04 3.5- and 4.5-Digit, Single-Chip ADCs with LED Drivers General Description The MAX1447/MAX1496/MAX1498 low-power, 3.5- and 4.5-digit, analog-to-digital converters (ADCs) with integrated light-emitting diode (LED) drivers operate from a single 2.7V to 5.25V power supply. They include an internal reference, a high-accuracy on-chip oscillator, and a multiplexed LED display driver. An internal charge pump generates the negative supply needed to power the integrated input buffers.

  MAX1446   MAX1446







10-Bit / 60Msps / 3.0V / Low-Power ADC

19-1729; Rev 1; 7/03 KIT ATION EVALU E L B A IL AVA 10-Bit, 60Msps, 3.0V, Low-Power ADC with Internal Reference General Description Features o Single 3.0V Operation o Excellent Dynamic Performance 59.5dB SNR at fIN = 20MHz 73dB SFDR at fIN = 20MHz o Low Power: 30mA (Normal Operation) 5µA (Shutdown Mode) o Fully Differential Analog Input o Wide 2Vp-p Differential Input Voltage Range o 400MHz -3dB Input Bandwidth o On-Chip 2.048V Precision Bandgap Reference o CMOS-Compatible Three-State Outputs o 32-Pin TQFP Package MAX1446 The MAX1446 10-bit, 3V analog-to-digital converter (ADC) features a fully differential input, a pipelined 10stage ADC architecture with digital error correction and wideband track and hold (T/H) incorporating a fully differential signal path. This ADC is optimized for lowpower, high dynamic performance applications in imaging and digital communications. The MAX1446 operates from a single 2.7V to 3.6V supply, consuming only 90mW while delivering a 59.5dB signal-to-noise ratio (SNR) at a 20MHz input frequency. The fully differential input stage has a 400MHz, -3dB bandwidth and may be operated with single-ended inputs. In addition to low operating power, the MAX1446 features a 5µA power-down mode for idle periods. An internal 2.048V precision bandgap reference is used to set the ADC full-scale range. A flexible reference structure allows the user to supply a buffered, direct or externally derived reference for applications requiring increased accuracy or a .


2005-05-06 : M68AW031AL70N6U    M68AW031AL70NS6U    M68AW031AM70MS6U    M68AW031AM70N6U    M68AW031AM70NS6U    M68AW064F    M68AW127    M68AW127B    M68AW128M    M68AW511A   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)