www.DataSheet4U.com
19-3266; Rev 1; 8/04
+1.2V to +3.6V, 0.1µA, 100Mbps, Single-/Dual-/Quad-Level Translators
General ...
www.DataSheet4U.com
19-3266; Rev 1; 8/04
+1.2V to +3.6V, 0.1µA, 100Mbps, Single-/Dual-/Quad-Level Translators
General Description
The MAX13013–MAX13017/MAX3023–MAX3028 single-/ dual-/quad-level translators provide the level shifting necessary to allow 100Mbps data transfer in a multi
voltage system. Externally applied
voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL side of the device appear as a higher
voltage logic signal on the VCC side of the device, and vice-versa. The MAX13013 single-, the MAX13014–MAX13017 dual-, and the MAX3023–MAX3028 (UCSP™ package) quad-level translators feature an enable (EN) input. The MAX3023–MAX3028 (TSSOP package) quad-level translators feature EN and EN inputs. When disabled, each device places all inputs/outputs on both sides in tri-state and reduces the VCC supply current to 0.03µA, and the VL supply current to 0.1µA. These devices operate at a guaranteed 100Mbps data rate for VL > 1.8V. The MAX13013–MAX13017/MAX3023–MAX3028 accept a +1.65V to +3.6V VCC
voltage and a +1.2V to (VCC 0.4V) VL
voltage, making them ideal for data transfer between low-
voltage ASICs/programmable logic devices (PLDs) and higher
voltage systems. The MAX13013 is available in 3 x 2 UCSP and 6-pin SC70 packages. The MAX13014–MAX13017 are available in 3 x 3 UCSP and 8-pin SOT23 packages. The MAX3023–MAX3028 are available in 4 x 3 UCSP and 14-pin TSSOP packages. All devices operate over the extended -40°C to +85°C ...