5-Bit GaAs Digital Attenuator DC - 2 GHz
Features
q q
MADA2030G
V 2.00
q
Attenuation 0.5-dB Steps to 15.5 dB Temperat...
5-Bit GaAs Digital Attenuator DC - 2 GHz
Features
q q
MADA2030G
V 2.00
q
Attenuation 0.5-dB Steps to 15.5 dB Temperature Stability ±0.1 dB from -55° to +85°C Typical Fast Switching Speed, 3 ns Typical to 90%
Guaranteed Specifications (From -55°C to +85°C)
Frequency Range Nominal Attenuation Attenuation Accuracy ±0.15 dB DC - 2.0 GHz 0.5 dB Steps to 15.5 dB Max ±3% of Attenuation Setting 1.6:1 Max 2.3 dB Max 1.9 dB Max
Typical Performance
VSWR Worst Case Setting Reference Insertion Loss
DC - 2 GHz DC - 2 GHz DC - 1 GHz
Operating Characteristics
Impedance 50 Ω Nominal Phase Balance (For any bit or combinations of bits per unit) 2 GHz +4/-6 Degrees Typ 1 GHz +2/-3 Degrees Typ 500 MHz +1/-2 Degrees Typ Switching Characteristics Switching Time (50% CTL to 90/10% RF) Switching Transients (Unfiltered) Input Power for 1 dB Compression Above 500 MHz 100 MHz Intermodulation Intercept Point (for two-tone input power up to +5 dBm) Intercept Points Above 500 MHz 100 MHz 3 ns Typ 7 mV Typ +27 dBm Typ +24 dBm Typ
IP2 +68 dBm Typ +45 dBm Typ
IP3 +45 dBm Typ +40 dBm Typ
Control
Voltages (Complementary Logic) VINLow 0 to -0.2 V @ 5 µA Max VINHi -5 V @ 75 µA Typ to -8 V @ 250 µA Max Die Size 0.045" x 0.039" x 0.010" (1.14mm x 0.99mm x 0.25mm
Handling, Mounting and Bonding Procedure Handling Precautions
Permanent damage to the MADA2030 may occur if the following precautions are not adhered to: A. Cleanliness – The MADA2030 should be handled in a clean environment. DO NOT attempt to c...