LTC4215/LTC4215-2 Hot Swap Controller with I2C Compatible Monitoring
FEATURES
n Allows Safe Insertion into Live Backpla...
LTC4215/LTC4215-2 Hot Swap Controller with I2C Compatible Monitoring
FEATURES
n Allows Safe Insertion into Live Backplane n 8-Bit ADC Monitors Current and
Voltage n I2C/SMBus Interface n Wide Operating
Voltage Range: 2.9V to 15V n 20μs (LTC4215) or 420μs (LTC4215-2) Circuit
Breaker Timeout n dI/dt Controlled Soft-Start n High Side Drive for External N-Channel
MOSFET n No External Gate Capacitor Required n Input Over
voltage/Under
voltage Protection n Optional Latchoff or Auto-Retry After Faults n Alerts Host After Faults n Inrush Current Limit with Foldback n Available in 24-Pin (4mm × 5mm) QFN Package n LTC4215 also available in 16-Lead Narrow SSOP
Package
APPLICATIONS
n Live Board Insertion n Electronic Circuit Breakers n Computers, Servers n Platform Management
L, LT, LTC, LTM, Linear Technology, the Linear logo and Hot Swap are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. Protected by U.S. Patent including 7330065.
DESCRIPTION
The LTC®4215/LTC4215-2 Hot Swap™ controllers allow a board to be safely inserted and removed from a live backplane. Using an external N-channel pass transistor, board supply
voltage and inrush current are ramped up at an adjustable rate. An I2C interface and onboard ADC allow for monitoring of load current,
voltage and fault status.
The device features adjustable foldback current limit and a soft-start pin that sets the dI/dt of the inrush current. An I2C interface may confi...