LT4220 Dual Supply Hot Swap Controller
FEATURES
s s s s s
DESCRIPTIO
s s s s
Hot SwapTM Controller for Positive and N...
LT4220 Dual Supply Hot Swap Controller
FEATURES
s s s s s
DESCRIPTIO
s s s s
Hot SwapTM Controller for Positive and Negative Supplies Supply Tracking Mode ±2.7V to ±16.5V Operation Analog Current Limit with Foldback Allows Safe Board Insertion and Removal from a Live Backplane Open-Collector Power Good Comparators Automatic Retry or Latchoff After a Current Fault Dual Under
voltage Lockout Comparator Inputs Current Fault Indication
The LT®4220 16-pin dual
voltage Hot Swap controller allows a board to be safely inserted and removed from a live backplane. The device operates with any combination of 2.7V to 16.5V and –2.7V to –16.5V supplies. Using two external N-channel pass transistors, the board supply
voltages can be ramped up at an adjustable rate. A selectable tracking mode allows dual supply tracking control for ramping the positive and negative supplies together. The LT4220 features foldback current limit and latches off both gates if either supply remains in current limit longer than an adjustable time period. The IC can be configured for automatic restart after a delay set by the same timer. A power good signal indicates when the output
voltages monitored by the two FB comparators are within tolerance, and the gate drive signals are at their full on
voltage. The LT4220 is available in a 16-lead narrow SSOP package.
, LTC and LT are registered trademarks of Linear Technology Corporation. Hot Swap is a trademark of Linear Technology Corporation.
U APPLICATIO S
s s s ...