Aluminum Electrolytic Capacitors
Large Type Features
•Has a snap-in terminal which can solder to PCB directly and need n...
Aluminum Electrolytic
Capacitors
Large Type Features
Has a snap-in terminal which can solder to PCB directly and need not fixture to save processing time Suitable for electronic equipment with medium-high
voltage circuits Printed circuit board terminal snap-in type and lug terminal type available. SPECIFICATIONS
Items Operating Temperature Range Capacitance Tolerance Leakage Current (at 20℃) Performance
-40℃ ~ +85℃ ±20% I = 0.02CV or 1.5 mA whichever is smaller (after 5 minutes) Where, C= rated capacitance in μF. Rated
Voltage Tanδ(max) 16 0.40 25 0.30 35 0.25 V = rated DC working
voltage in V. 50 0.20 63 0.15 100 0.15 160 0.15 200 0.15 250 0.15 350 0.20 400 0.20 450 0.20
LS
(at 120Hz, 20℃)
Dissipation Factor (Tanδat 120Hz, 20℃)
Impedance ratio shall not exceed the values given in the table below.
Low Temperature Characteristics (at 120Hz)
Rated
Voltage Impedance Z(-25℃)/Z(+20℃) Ratio Z(-40℃)/Z(+20℃)
16 4 15
25 3 10
35 3 8
50 2 6
63 2 6
100 160 200 250 350 400 450 2 5 4 4 4 8 4 10 4 16 8 18 8 20
Test Time Capacitance Change
2000 Hrs Within ±20%of initial value Less than 200% of specified value Within specified value
Load Life Test
Dissipation Factor Leakage Current applied for 2000 hrs at 85℃.
* The above specifications shall be satisfied when the
capacitors are restored to 20℃after the rated
voltage
Test Time Capacitance Change
1000 Hrs Within ±20%of initial value Less than 150% of specified value Within specified value
Shelf Life Test
Dissipation Fa...