DatasheetsPDF.com

LPS102-M Datasheet

Part Number LPS102-M
Manufacturers Emerson
Logo Emerson
Description AC-DC / 136W - 260W Medical
Datasheet LPS102-M DatasheetLPS102-M Datasheet (PDF)

Embedded Power for Business-Critical Continuity LPS100-M Series 150 Watts Total Power: Input Voltage: # of Outputs: 80 - 150 Watts 90 - 264 Vac Single Rev. 4.30.09_29 LPS100-M Series  of 3 Special Features • • • • • • • • • • • • • • Medical and ITE safeties Active power factor correction 2” x 4” footprint Less than 1U high EN61000-3-2 compliant Remote sense Power fail Adjustable main output Built-in Class B EMI filter Overvoltage protection Overload protection Thermal overl.

  LPS102-M   LPS102-M






AC-DC / 136W - 260W Medical

Embedded Power for Business-Critical Continuity LPS100-M Series 150 Watts Total Power: Input Voltage: # of Outputs: 80 - 150 Watts 90 - 264 Vac Single Rev. 4.30.09_29 LPS100-M Series  of 3 Special Features • • • • • • • • • • • • • • Medical and ITE safeties Active power factor correction 2” x 4” footprint Less than 1U high EN61000-3-2 compliant Remote sense Power fail Adjustable main output Built-in Class B EMI filter Overvoltage protection Overload protection Thermal overload protection Isolated12 V Fan output LPX50 Enclosure kit available Electrical Specifications Input Input ra­nge: Frequency: Inrush current: Efficiency: EMI/RFI: Safety ground leakage current: 90 - 264 Vac; 120 - 300 Vdc 47-63 Hz 50 A max., cold start @ 25 °C 88% typical at full load FCC Class B conducted; CISPR22 Class B conducted; EN55022 Class B conducted; VDE0878PT3 Class B conducted 275 µA @ 50/60 Hz, 264 Vac input  Output 100 W for convection (80 W for LPS102-M); 150 W with 30 CFM forced air (120 W for LPS102-M) Adjustment range: ± 10% minimum on the main outputs Fan output: 12 V @ 1 A isolated, ± 10% Hold-up time: 10 ms @ 150 W load, 120 Vac input Overload protection: Short circuit protection on all outputs. Case overload protected @ 110-160% above rating Overvoltage protection: 15-35% above nominal output Maximum power: Logical Control Power failure: Open collector logic signal goes high 100-500 msec after main output; it goes low at least 6 msec before loss of regulation .


2009-10-25 : AEH25B48    AEH25B48-6    AEH25B48-6CL    AEH25B48-CL    AEH25B48N    AEH25B48N-6    AEH25B48N-6    AEH25B48N-6CL    AEH25B48N-CL    AEH25B48N-L   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)