LM5015
www.ti.com
SNVS538C – NOVEMBER 2007 – REVISED APRIL 2013
LM5015 High Voltage Monolithic Two-Switch Forward DC-...
LM5015
www.ti.com
SNVS538C – NOVEMBER 2007 – REVISED APRIL 2013
LM5015 High
Voltage Monolithic Two-Switch Forward DC-DC Regulator
Check for Samples: LM5015
FEATURES
1
2 Dual Integrated 75V N-Channel
MOSFETs Ultra-Wide Input
Voltage Range: 4.25V to 75V Integrated High
Voltage Bias Regulator Adjustable Output
Voltage 1.5% Feedback Reference Accuracy Current Mode Control with Selectable
Compensation Wide Bandwidth Error Amplifier Integrated Current Sensing and Limiting 50% Maximum Duty Cycle Limit Single Resistor Oscillator Programming Oscillator Synchronization Capability Programmable Soft-Start Enable / Under-
Voltage Lockout (UVLO) Pin Thermal Shutdown
PACKAGE
HTSSOP-14EP (Exposed Pad)
DESCRIPTION
The LM5015 high
voltage switch mode regulator features all the functions necessary to implement efficient high
voltage Two-Switch Forward and TwoSwitch Flyback regulators, using a minimum of external components. This easy to use regulator integrates high side and low side 75 Volt N-Channel
MOSFETs with a minimum 1 Amp peak current limit. The
voltage across the
MOSFETs employed in the two-switch topology is clamped to the input
voltage, allowing the input
voltage range to approach the rating of the
MOSFETs. The regulator control method is based on current mode control providing inherent ease of loop compensation and line feed-forward for superior rejection of input transients.
The operating frequency is set with a single resistor and is programmable u...