LM5000EP Enhanced Plastic High Voltage Switch Mode Regulator
May 2004
LM5000EP Enhanced Plastic High Voltage Switch Mo...
LM5000EP Enhanced Plastic High
Voltage Switch Mode Regulator
May 2004
LM5000EP Enhanced Plastic High
Voltage Switch Mode Regulator
General Description
The LM5000EP is a monolithic integrated circuit specifically designed and optimized for flyback, boost or forward power converter applications. The internal power switch is rated for a maximum of 80V, with a current limit set to 2A. Protecting the power switch are current limit and thermal shutdown circuits. The current mode control scheme provides excellent rejection of line transients and cycle-by-cycle current limiting. An external compensation pin and the built-in slope compensation allow the user to optimize the frequency compensation. Other distinctive features include softstart to reduce stresses during start-up and an external shutdown pin for remote ON/OFF control. There are two operating frequency ranges available. The LM5000-3EP is pin selectable for either 300kHz (FS Grounded) or 700kHz (FS Open). The LM5000-6EP is pin selectable for either 600kHz (FS Grounded) or 1.3MHz (FS Open). The device is available in a low profile 16-lead TSSOP package or a thermally enhanced 16-lead LLP package. ENHANCED PLASTIC Extended Temperature Performance of −40˚C to +125˚C Baseline Control - Single Fab & Assembly Site Process Change Notification (PCN) Qualification & Reliability Data Solder (PbSn) Lead Finish is standard
Features
n 80V internal switch n Operating input
voltage range of 3.1V to 40V n Pin selectable operat...