LM2433

www.DataSheet4U.com LM2433 220V Monolithic Single Channel 16 MHz EDTV CRT Driver November 2005 LM2433 220V Monolithic Single Channel 16 MHz EDTV CRT Driver General Description The LM2433 is a single channel high voltage CRT driver circuit designed for use in Rear-Projection and Direct-View EDTV applications. The IC contains a high input impedance, wide band amplifier which can be DC coupled to a cathode of a CRT. The amplifier has its gain internally set to −53 and can drive CRT capacitive loads as well as resistive loads present in other applications, limited only by the package’s power dissipation. The IC is packaged in a staggered 7-lead TO-220 molded plastic power package designed specifically to meet high voltage spacing requirements. See the section “Power Dissipation and Heatsink Calculation” for more information. Features n n n n n 16 MHz bandwith at 110VPP output swing 0V to 4V input range Greater than 110VPP output swing capability IK Current Output (pin 5) for IK feedback systems Emitter (pin 6) access to increase voltage gain Applications n For Rear-Projection and Direct-View DC coupled CRT applications using EDTV formats n Compatible with RGB video processors with IK feedback for automatic cathode calibration Pinout Diagram Schematic Diagram 20146202 Note: Tab is at GND. Top View Order Number LM2433TE FIGURE 1. Simplified Connection and Pinout Diagram FIGURE 2. Simplified Schematic Diagram 20146201 © 2005 National Semiconductor Corporation DS201462 w...