LL1005-FH56NS

Multilayer Chip Inductors LL1005-FH Series TYPE LL1005-FH Series Inductance Range: 1.0~100nH (E-12) Temperature Coefficient of L: + 250ppm/°C typical DIMENSIONS / Length (mm) 1.0 ± 0.1 Width (mm) 0.5 ± 0.1 Thickness (mm) 0.5 ± 0.1 Electrode width A (mm) 0.25 ± 0.1 Marking of polarity: Marking is on the upper Surface of the unit. Marking of polarity Marking: Blue Green L W T A ELECTRICAL CHARACTERISTICS / Inductance Range 1.0~100nH (E-12 Series) Inductance Tolerance S ; ± 0.3nH (1.0~5.6nH) J ; ± 5% (6.8~100nH) K ; ± 10% (3.3~100nH) Q (Typ.) 20~34 (at 800MHz) Rated Current 150~300mA L Temperature Coefficient (Typ.) + 250ppm/°C Applicable Temperature Range − 40~+ 100°C PART NUMBERING SYSTEM / L L 1 0 0 5—F H Material / Physical Dimensions / TOKO's Type name / Inductance Unit is nH and 3 digits are used. The value is indicated as shown below. Example / 4N7…4.7nH, 27N…27nH SOLDERING CONDITIONS / Recommended Pattern c b ab 20 ~ 34 (at 800MHz) Tolerance / Inductance / Tolerance for the Inductance Mark S J K Tolerance ± 0.3nH ± 5% ± 10% Pattern Dimensions (unit: mm) Flow Soldering Reflow Soldering a 0.3~0.5 0.3~0.5 b 0.4~0.5 0.3~0.5 c 0.3~0.5 0.3~0.4 Conditions for soldering temperatures are determined as per figures below after prior confirmation that abnormalities are not evident. Flow Soldering 7s. 230±5°C 80±20°C 2min. Reflow Soldering 240°C 225°C 20s. 140~170°C 80s. 2min. Soldering Iron 2s. 250± 10°...