www.DataSheet4U.com
LED Highly-Diffused Lights (75 mm)
Features
• Designed to minimize surface textures and elevation c...
www.DataSheet4U.com
LED Highly-Diffused Lights (75 mm)
Features
Designed to minimize surface textures and elevation changes, while providing uniform illumination over the field of view 59 mm x 75 mm light aperture The suggested field of view is 38 mm in diameter and the suggested stand off is 25 mm Black anodized aluminum housing
LED Highly-Diffused Light Models
Models Illumination Type Color Cable Supply
Voltage Supply Current Connections
Pin 1 = +V fan Pin 2 = dc common fan Pin 3 = dc common Pin 4 = +V Power supply model PSA-12(E) or PS2V-12(E) is recommended (see other side) Pin 4 or 5 = +V Pin 1 or 6 = dc common Use strobe control module model SCM (see other side)
LEDRS75N† Continuous highly-diffused light LEDGS75N†
Red 640 nm
Green 530 nm
0.5 m (18") terminated with 9-pin D-sub connector (male pins)
980 mA max. 12V dc ±10% with
voltage regulation of ±1% 1.0 A max.
LEDRS75N-S†
Strobed highly-diffused light
Red 640 nm
1.8 m (6') terminated with 9-pin D-sub connector (male pins)
24V dc ±10% with
voltage regulation of ±1%
7.0 A max. 1 ms pulse
†
These models are not stocked and are non-returnable.
Useful Life Environmental Rating Operating Conditions Green model: 50,000 hours; Red models: 60,000 hours. Note: actual useful life of strobed lights depends on duty cycle IEC IP20; NEMA 1 Temperature: 0° to 40°C (+32° to 104°F) Maximum relative humidity: 95% at 40°C (non-condensing)
82.6 mm 75 mm (3.25") (2.95") Light Aperture
25.4 mm (1.00") 25.4 mm (1.00...