LED19
TECHNICAL DATA
Mid-Infrared Light Emitting Diode
Light Emitting Diodes with central wavelength 1.95 µm series ar...
LED19
TECHNICAL DATA
Mid-Infrared Light Emitting Diode
Light Emitting Diodes with central wavelength 1.95 µm series are based on heterostructures grown on GaSb substrates by LPE. Solid solutions GaInAsSb are used in the active layer. Wide band gap solid solutions AlGaAsSb with Al content 64% are used for good electron confinement. LED19 has a stable ouput power and a lifetime more then 80000 hours.
Specifications
Structure: Peak Wavelength: Optical Output Power: Package:
GaInAsSb/AlGaAsSb typ. 1.95 µm
typ. 1 mW qCW TO-18
with cap and window
Absolute Maximum Ratings (TA=25°C)
Item
Peak Wavelength FWHM Quasi-CW Optical Power
Pulsed Optical Power
Switching Time Operation
Voltage Operating Temperature Emitting Area Soldering Temperature Package
Condition
T=300 K 150 mA qCW
Min. 1.90 100
Value
Typ. 1.95 150
Max. 1.99 200
Unit
µm nm
200 mA qCW 0.8 1.0 1.2 mW
1 A, f=1 kHz,
duty cycle
20
25
30 mW
0.1%
T=300 K 10 20 30 ns
200 mA qCW 0.5 - 1.5 V
-200 … +50
°C
300 x 300
µm
180 °C
TO-18, with non-removeable cap and window
Operation Instructions
LED basic circuit connection
24.09.2012
(Unit: mm)
We recommend to use one of our drivers and evaluation boards designed for those Mid-IR LEDs D-11, D-31, D-31M DLT-27, DLT-37 mD-1c, mD-1p
LED19
1 of 3
We recommend to use Quasi Continuous Wave (qCW) mode with duty cycle 50% or 25% to obtain maximum average optical power and short Pulse mode to obtain maximum peak power.
Hard CW (continues wave) mode is N...