Ordering number : EN5657
Monolithic Digital IC
LB1862M
Single-Phase Full-Wave Driver for Fan Motors
Overview
The LB18...
Ordering number : EN5657
Monolithic Digital IC
LB1862M
Single-Phase Full-Wave Driver for Fan Motors
Overview
The LB1862M is a single-phase full-wave driver provided in a miniature package that is optimal for driving miniature fans such as CPU cooling fans. It provides motor drive with low switching noise and high efficiency.
Package Dimensions
unit: mm 3086A-MFP10S
[LB1862M]
Functions
Supports both 5- and 12-V power supplies. Allows the use of reverse connection prevention diodes by including a regeneration circuit on chip. On-chip Hall amplifier with hysteresis characteristics (Supports commutator-free cores.) Lock protection and automatic recovery circuits Lock detection pin (Latch type – Low: drive, High: stopped) Supports low current drain in standby mode by providing a Hall bias pin and a start/stop pin. Thermal shutdown circuit
SANYO: MFP10S
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter Supply
voltage Output current Output
voltage RD output
voltage RD output current HB output current ST input
voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max IOUT max VOUT max VR max IR max IB max VST max Pd max Topr Tstg When mounted on the specified board * Conditions Ratings 17 0.5 15 15 5 10 15 850 –20 to +75 –55 to +150 Unit V A V V mA mA V mW °C °C
Note: * Specified board: 114.3 × 76.2 × 1.5 mm epoxy glass laminate board
Allowable Operating Ranges at Ta = 25°C
Parameter Supply
voltage ST input high-le...