®
L4987 SERIES
VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT AND DROPOUT CONTROL FLAG
s
s s
s s
s s s s s
VERY LOW...
®
L4987 SERIES
VERY LOW DROP
VOLTAGE REGULATORS WITH INHIBIT AND DROPOUT CONTROL FLAG
s
s s
s s
s s s s s
VERY LOW DROPOUT
VOLTAGE (0.25V TYP.) DROPOUT CONTROL FLAG VERY LOW QUIESCENT CURRENT (TYP. 90 µA IN OFF MODE, 500µA IN ON MODE) OUTPUT CURRENT UP TO 200 mA LOGIC-CONTROLLED ELECTRONIC SHUTDOWN OUTPUT
VOLTAGES OF 3V, 5V 8.7V 12V INTERNAL CURRENT AND THERMAL LIMIT ONLY 2.2µF FOR STABILITY AVAILABLEIN ± 2% SELECTION AT 25 oC SUPPLY
VOLTAGE REJECTION: 70 dB (TYP.)
PPAK
DESCRIPTION The L4987 is a very low drop regulator available in PPAK. The very low drop-
voltage (0.5V Max at 200 mA) and the very low quiescent current make it particularly suitable for low noise, low power applications, and in battey powered systems. The input dump protection up to 40V makes it ideal for automotive applications. a shutdown Logic Control function is available (pin2, TTL compatible). This means that when the device is used as a local regulator, it is possible to put a SCHEMATIC DIAGRAM
part of the boad in standby, decreasing the total power consumption. The regulator employs an output pin (open collector) providing a logic signal when the pass transistor is in saturation at low input
voltage, this signal can be used to prevent the pop-up phenomenon in the car radio. In battery powered systems (the cellular phone, notebook) it is possible to use the flag to monitor the battery charge status through the dropout of the regulator.
October 1998
1/11
L4987 SERIES
ABSOLUTE MAXIMUM RATINGS
...