KT8555
TIME SLOT ASSIGNMENT CIRCUIT
INTRODUCTION
20-CERDIP The KT8555 is a per channel Time Slot Assignment Circuit (T...
KT8555
TIME SLOT ASSIGNMENT CIRCUIT
INTRODUCTION
20-CERDIP The KT8555 is a per channel Time Slot Assignment Circuit (TSAC) that produces 8-bit receive and transmit time slots for four 1 CHIP CODEC. Each frame synchronization pulse may be independently assigned to a time slot in a frame of up to 84 time slots.
FEATURES
l l l l l l l l Single, 5V operation Low power consumption: 5mW Controls four 1 CHIP CODEC Independent transmit and receive frame syncs enables channel unidirectional mode Up to 64 time slots per frame Compatible with KT8554/7 CODECs TTL and
CMOS compatible
ORDERING INFORMATION
Device KT8555J Package 20-CERDIP Operating Temperature - 20°C ~ + 125°C
PIN CONFIGURATION
FSX1 FSR1 FSX0 FSR0 TSX DC CLKC CS MODE
1 2 3 4 5 6 7 8 9
20 VCC 19 FSR2 18 FSX2 17 FSR3 16 FSX3 15 CH0 14 CH1 13 RSYC/CH2 12 XSYC 11 BCLK
KT8555
GND 10
Fig. 1
KT8555
PIN DESCRIPTION
Pin No 3 1 18 16 4 2 19 17 5 6 7 8 9 10 11 12 Symbol FSX0 FSX1 FSX2 FSX3 FSR0 FSR1 FSR2 FSR3 TSX DC CLKC CS MODE GND BCLK XSYC
TIME SLOT ASSIGNMENT CIRCUIT
Description A frame sync output which is normally low, and goes active-high for 8 cycles of BCLK when a valid transmit time slot assignment is made.
A frame sync output which is normally low, and goes active-high for 8 cycles of BCLK when a valid receive time slot assignment is made.
This pin pulls low during any active transmit time slot. (N-channel open drain) The input for an 8 bit serial control word. X is the first bit clocked in. The clock input ...