KSZ8995XA

KSZ8995XA Integrated 5-Port 10/100 QoS Switch Features Integrated Switch with Five MACs and Five Fast Ethernet Transceivers Fully Compliant to IEEE 802.3u Standard Shared Memory Based Switch Fabric with fully Nonblocking Configuration 10BASE-T, 100BASE-TX and 100BASE-FX Modes (FX in Ports 4 and 5) Dual MII Configuration: MII-Switch (MAC or PHY Mode MII) and MII-P5 (PHY Mode MII) VLAN ID Tag/Untag Options, Per-Port Basis Enable/Disable Option for Huge Frame Size Up to 1916 Bytes Per Frame Broadcast Storm Protection with Percent Control – Global and Per-Port Basis Optimization for Fiber-to-Copper MediA Conversion Full-Chip Hardware Power-Down Support (Register Configuration not Saved) Per-Port-Based Software Power-Save on PHY (Idle Link Detection, Register Configuration Preserved) QoS/CoS Packets Prioritization Supports: Per Port, 802.1p and DiffServ-Based 802.1p/q Tag Insertion or Removal on a Per-Port Basis (Egress) Port-Based VLAN Support MDC and MDI/O Interface Support to Access the MII PHY Control Registers (Not All Control Registers) MII Local Loopback Support On-Chip 64Kbyte Memory for Frame Buffering (Not Shared with 1K Unicast Address Table) 1.4Gbps High Performance Memory Bandwidth Wire-Speed Reception and Transmission Integrated Look-Up Engine with Dedicated 1K Unicast MAC Addresses Automatic Address Learning, Address Aging and Address Migration Full-Duplex IEEE 802.3x and Half-Duplex Back Pressure Flow Control The Design ...