KA1M0680

www.DataSheet4U.net SPS KA1M0680 SPS TO-3P-5L The SPS product family is specially designed for an off-line SMPS with minimal external components. The SPS consist of high voltage power SenseFET and current mode PWM IC. Included PWM controller features integrated fixed oscillator, under voltage lock out, leading edge blanking, optimized gate turn-on/turn-off driver, thermal shut down protection, over voltage protection, and temperature compensated precision current sources for loop compensation and fault protection circuitry. Compared to discrete MOSFET and controller or RCC switching converter solution, a SPS can reduce total component count, design size, weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for cost effective design in either a flyback converter or a forward converter. 1.DRAIN 2. GND 3. VCC 4. FB 5. S/S FEATURES ORDERING INFORMATION Precision fixed operating frequency (70kHz) Pulse by pulse over current limiting Over Current Protection Over Voltage Protection (Min. 23V) Internal thermal shutdown function Under voltage lockout Internal high voltage sense FET Latch up mode Soft start Device KA1M0680 Package TO-3P-5L Operating Temperature −25°C to +85°C BLOCK DIAGRAM #3 VCC 32V 5V Vref Good logic #5 Soft Start 5V OSC S R #4 FB 5µA − 1mA 2.5R 1R 9V + 7.5V − + 25V − Thermal S/D OVER VOLTAGE S/D + L.E.B 0.1V S R Q #2 GND Q Internal bias #1 DRAIN SFET Power on reset Rev. ...