32M x 8 Bit NAND Flash Memory
K9F5608U0A-YCB0,K9F5608U0A-YIB0
Document Title
32M x 8 Bit NAND Flash Memory
FLASH MEMORY
Revision History
Revision No...
Description
K9F5608U0A-YCB0,K9F5608U0A-YIB0
Document Title
32M x 8 Bit NAND Flash Memory
FLASH MEMORY
Revision History
Revision No. History
0.0 Initial issue.
Draft Date
July 17th 2000
Remark
Advanced Information Preliminary
0.1
1. Support copy-back program - The copy-back program is configured to quickly and efficiently rewrite data stored in one page within the array to another page within the same array without utilizing an external memory. Since the time-con suming sequently-reading and its re-loading cycles are removed, the system performance is improved. The benefit is especially obvious when a portion of a block is updated so that the rest of the block also need to be copied to the newly assigned free block.
Oct. 4th 2000
0.2
Nov. 20th 2000 1. Explain how pointer operation works in detail. 2. For partial page programming into the copied page - Once the copy-back Program is finished, any additional partial page programming into the copied pages is prohibited before erase. 3. Renamed GND input (pin # 6) on behalf of SE (pin # 6) - The SE input controls the access of the spare area. When SE is high, the spare area is not accessible for reading or programming. SE is rec ommended to be coupled to GND or Vcc and should not be toggled during reading or programming. => Connect this input pin to GND or set to static low state unless the sequential read mode excluding spare area is used. 4. Updated operation for tRST timing - If reset command(FFh) is written at Ready state, the dev...
Similar Datasheet