JTK1524D12 Datasheet
DC-DC
15/20 Watts JTK Series
xppower.com
• Very High Power Density • Wide 4:1 Input Range • Operating Temperature -40 °C to +100 °C • Single & Dual Outputs • 1600 VDC Isolation • UL Approved • High Efficiency - up to 89% • 3 Year Warranty
Specification
Input
Input Voltage Range
Input Current Input Filter Input Reflected Ripple Current
Input Surge
• 24 V (9-36 VDC) 48 V (18-75 VDC)
• See table • Pi network • JTK15: 20 mA pk-pk
JTK20: 30 mA pk-pk through 12 µH inductor and 47 µF capacitor, 5 Hz to 20 MHz • 24 V models: 50 VDC for 100 ms • 48 V models: 100 VDC for 100 ms
Output
Output Voltage
• See table
Output Trim
• ±10% max on single output
Minimum Load
• No minimum load required
Initial Set Accuracy • ±1% max
Start Up Delay
• 20 ms typical
Line Regulation
• JTK15: ±0.2% max, JTK20: ±0.5% max
Load Regulation
• ±0.5% max single, ±1.0% max dual
Cross Regulation
• ±5% on dual output models, (see note 2)
Transient.
DC-DC
15/20 Watts JTK Series
xppower.com
• Very High Power Density • Wide 4:1 Input Range • Operating Temperature -40 °C to +100 °C • Single & Dual Outputs • 1600 VDC Isolation • UL Approved • High Efficiency - up to 89% • 3 Year Warranty
Specification
Input
Input Voltage Range
Input Current Input Filter Input Reflected Ripple Current
Input Surge
• 24 V (9-36 VDC) 48 V (18-75 VDC)
• See table • Pi network • JTK15: 20 mA pk-pk
JTK20: 30 mA pk-pk through 12 µH inductor and 47 µF capacitor, 5 Hz to 20 MHz • 24 V models: 50 VDC for 100 ms • 48 V models: 100 VDC for 100 ms
Output
Output Voltage
• See table
Output Trim
• ±10% max on single output
Minimum Load
• No minimum load required.
DC-DC Converter
DC-DC
15/20 Watts JTK Series
xppower.com
• Very High Power Density • Wide 4:1 Input Range • Operating Temperature -40 °C to +100 °C • Single & Dual Outputs • 1600 VDC Isolation • UL Approved • High Efficiency - up to 89% • 3 Year Warranty
Specification
Input
Input Voltage Range
Input Current Input Filter Input Reflected Ripple Current
Input Surge
• 24 V (9-36 VDC) 48 V (18-75 VDC)
• See table • Pi network • JTK15: 20 mA pk-pk
JTK20: 30 mA pk-pk through 12 µH inductor and 47 µF capacitor, 5 Hz to 20 MHz • 24 V models: 50 VDC for 100 ms • 48 V models: 100 VDC for 100 ms
Output
Output Voltage
• See table
Output Trim
• ±10% max on single output
Minimum Load
• No minimum load required
Initial Set Accuracy • ±1% max
Start Up Delay
• 20 ms typical
Line Regulation
• JTK15: ±0.2% max, JTK20: ±0.5% max
Load Regulation
• ±0.5% max single, ±1.0% max dual
Cross Regulation
• ±5% on dual output models, (see note 2)
Transient.
2017-09-12 : LM139A LM239A LM339A LM711 LM711C LM1514 DH0034 DH0034C LC-40LE700E LC-40LE700S