ISP1362 Datasheet - Single-chip Universal Serial Bus On-The-Go controller

ISP1362 Single-chip Universal Serial Bus On-The-Go controller Rev. 04 — 24 December 2004 Product data 1. General des...

ISP1362 Single-chip Universal Serial Bus On-The-Go controller Rev. 04 — 24 December 2004 Product data 1. General description The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) controller integrated with the advanced Philips Slave Host Controller (PSHC) and the Philips ISP1181B Device Controller (DC). The USB OTG controller is compliant with On-The-Go Supplement to the USB 2.0 Speciﬁcation Rev. 1.0a. The host and device controllers are compliant with Universal Serial Bus Speciﬁcation Rev. 2.0, supporting data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s). The ISP1362 has two USB ports: port 1 and port 2. Port 1 can be hardware conﬁgured to function as a downstream port, an upstream port or an OTG port whereas port 2 can only be used as a downstream port. The OTG port can switch roles from host to peripheral, or from peripheral to host. The OTG port can become a host through the Host Negotiation Protocol (HNP) as speciﬁed in the OTG supp...