DATASHEET
ISL85003, ISL85003A
Highly Efficient 3A Synchronous Buck Regulator
The ISL85003 and ISL85003A are synchronous...
DATASHEET
ISL85003, ISL85003A
Highly Efficient 3A Synchronous Buck Regulator
The ISL85003 and ISL85003A are synchronous buck regulators with integrated high-side and low-side FETs. The regulator can operate from an input
voltage range of 4.5V to 18V while delivering a very efficient continuous 3A current. This is all delivered in a very compact 3mmx4mm DFN package.
The ISL85003 is designed on Renesas’ proprietary fab process that is designed to deliver very low rDS(ON) FETs with an optimized current mode controller wrapped around it. The high-side NFET is designed to have an rDS(ON) of 65mΩ while the low-side NFET is designed to have an rDS(ON) of 45mΩ. With these two FETs, the device delivers very high efficiency power to the load.
The ISL85003 can automatically switch between DCM and CCM for light-load efficiency in DCM. The switching frequency in CCM is internally set to 500kHz.
The device provides a maximum static regulation tolerance of ±1% over wide line, load and temperature ranges. The output is user adjustable, with external resistors, down to 0.8V. Pulling EN above 0.6V enables the controller. The regulator supports prebiased output.
Fault protection is provided by internal current limiting during positive or negative overcurrent conditions, output and input under and over
voltage detection and an over-temperature monitoring circuit.
Related Literature
For a full list of related documents, visit our website:
ISL85003, ISL85003A device pages
FN7968 Rev.3.00 Jul 31...