DATASHEET
ISL54226
High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP) and Dedicated Charger Por...
DATASHEET
ISL54226
High-Speed USB 2.0 (480Mbps) DPST Switch with Over
voltage Protection (OVP) and Dedicated Charger Port Detection
FN7614 Rev 2.00 Aug 15, 2016
The ISL54226 is a single supply, dual SPST (Single Pole/Single Throw) switch that is configured as a DPST. It can operate from a single 2.7V to 5.25V supply. The part was designed for switching or isolating a USB high-speed source or a USB high-speed and full-speed source in portable battery powered products.
The 3.5ΩSPST switches were specifically designed to pass USB full speed and USB high-speed data signals. They have high bandwidth and low capacitance to pass USB high-speed data signals with minimal distortion.
The ISL54226 has OVP detection circuitry on the COM pins to open the SPST switches when the
voltage at these pins exceeds 3.8V or goes negative by -0.45V. It isolates fault
voltages up to +5.25V or down to -5V from getting passed to the other side of the switch, thereby protecting the USB downstream transceive...