Power Module for 2 hp Motor Drives
PD 6.106 IRPT2059A
PRELIMINARY
IRPT2059A
™
Power Module for 2 hp Motor Drives
· 2 hp (1.5 kW) power output
Industrial...
Description
PD 6.106 IRPT2059A
PRELIMINARY
IRPT2059A
™
Power Module for 2 hp Motor Drives
· 2 hp (1.5 kW) power output
Industrial rating at 150% overload for 1 minute
· · · · · · · · · ·
180-240V AC input, 50/60 Hz 3-phase rectifier bridge 3-phase, short circuit rated, ultrafast IGBT inverter HEXFRED ultrafast soft recovery freewheeling diodes Brake IGBT and diode Low inductance (current sense) shunts in positive and negative DC rail NTC temperature sensor Pin-to-baseplate isolation 2500V rms Easy-to-mount two-screw package Case temperature range -25°C to 125°C operational
Figure 1. IRPT2059A Power Module
IRPT2059C
IRPT2059A Power Module IRPT2059D Driver-Plus Board PWM variable frequency output
180-240V 3-phase input
AC motor
feedback (non-isolated)
PWM generator
feedback processing
keyboard
Revised 6/97
Figure 2. The IRPT2059C control system
within a motor
page 1
IRPT2059A
System Description
The IRPT2059A Power Module
The IRPT2059A power module, shown in figure 1, is a chip and wire epoxy encapsulated module. It houses input rectifiers, brake IGBT and freewheeling diode, output inverter, current sense shunts and NTC thermistor. The 3-phase input bridge rectifiers are rated at 800V. The inverter section uses 600V, short circuit rated, ultrafast IGBTs and ultrafast freewheeling diodes. Current sensing is achieved through 45 mΩ low inductance shunts provided in the positive and negative DC bus rail. The NTC thermistor provides temperature sensing capability. The lead spaci...
Similar Datasheet