Data Sheet No. PD60046-S
IR2104(S) & (PbF)
HALF-BRIDGE DRIVER
Features
• Floating channel designed for bootstrap operat...
Data Sheet No. PD60046-S
IR2104(S) & (PbF)
HALF-BRIDGE DRIVER
Features
Floating channel designed for bootstrap operation
Fully operational to +600V Tolerant to negative transient
voltage dV/dt immune Gate drive supply range from 10 to 20V Under
voltage lockout 3.3V, 5V and 15V input logic compatible Cross-conduction prevention logic Internally set deadtime High side output in phase with input Shut down input turns off both channels Matched propagation delay for both channels Also available LEAD-FREE
Product Summary
VOFFSET IO+/VOUT ton/off (typ.) Deadtime (typ.) 600V max. 130 mA / 270 mA 10 - 20V 680 & 150 ns 520 ns
Packages
Description
The IR2104(S) are high
voltage, high speed power 8 Lead SOIC
MOSFET and IGBT drivers with dependent high and low 8 Lead PDIP IR2104S side referenced output channels. Proprietary HVIC and IR2104 latch immune
CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard
CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power
MOSFET or IGBT in the high side configuration which operates from 10 to 600 volts.
Typical Connection
up to 600V VCC
VCC
IN SD
VB HO VS LO
TO LOAD
IN SD COM
(Refer to Lead Assignment for correct pin configuration) This/These diagram(s) show electrical connections only. Please refer to our Application No...