INT202
Low-side Driver IC
Low-side Drive and High-side Control for Simultaneous Conduction
Product Highlights
5 V CMOS C...
INT202
Low-side Driver IC
Low-side Drive and High-side Control for Simultaneous Conduction
Product Highlights
5 V
CMOS Compatible Control Inputs Combines logic inputs for low and high-side drives Schmidt-triggered inputs for noise immunity Built-in High-
voltage Level Shifters Integrated level shifters simplify high-side interface Can withstand up to 800 V for direct interface to the INT201 high-side driver Pulsed high-
voltage level shifters reduce power consumption
VDD HV
®
INT201
LOAD
Gate Drive Output for an External
MOSFET Provides 300 mA sink/150 mA source current Can drive
MOSFET gate at up to 15 V External
MOSFET allows flexibility in design for various motor sizes Built-in Protection Features UV lockout
HS IN
INT202
LS IN
PI-1765-020296
Figure 1. Typical Application
Description
The INT202 Low-side driver IC provides gate drive for an external low-side
MOSFET switch and high-side level shifting. When used in conjunction with the INT201 high-side driver, the INT202 provides a simple, cost-effective interface between low-
voltage control logic and high-
voltage loads. The INT202 is designed to be used with rectified 110 V or 220 V supplies. Both high side and low side switches can be controlled independently from ground-referenced 5 V logic inputs on the low side driver. Pulsed level shifting saves power and provides enhanced noise immunity. The circuit is powered from a nominal 15 V supply to provide adequate gate drive for external N-channel MOS...