TECHNICAL DATA
Quad 3-State Noninverting Buffers
IN74VHCT125 is high-speed logic IC made by CMOS technology and designe...
TECHNICAL DATA
Quad 3-State Noninverting Buffers
IN74VHCT125 is high-speed logic IC made by
CMOS technology and designed for use in high-performance calculating systems with a wide supply
voltage range. As for operation speed, IN74VHCT125 can be compared with equivalent bipolar ICs based on Schottky TTL and two times surpasses ICs of IN74НС series. IN74VHCT125 tolerates operation under conditions when
voltage on input & output is exceeded up to 7V without affecting characteristics and IC reliability. This possibility allows to use IN74VHCT125 in radio-electronic devices for interfacing with supply
voltages 5V and 3V, eliminate IC failure under supply
voltage source emergency outage. Use of output edge shaping block in the microcircuit allows to reduce noise amplitude of noises when switching outputs into the same state simultaneously. Input levels of IN74VHCT125 are compatible with TTL level and output levels with
CMOS levels.
IN74VHCT125
ORDERING INFORMATION IN74VHCT125N Plastic IN74VHCT125D SOIC TA = -40° to 85° C for all packages
w
w
w
.
.D
at aS
he
et 4U .c
om
1
www.DataSheet4U.com
Features: Supply
voltage range 4.5 to 5.5 V. Output current 8 mA. Low consumption current: 0.2 mkA (typical value) at Та = 25 °С. Latchup current not less than 300 mA at Та = 85 °С. Tolerable value of static potential not less than 2000 V as per human body model (HBM) and not less than 200 V as per machine model (ММ). Ambient operation temperature minus 40 to...
