w them to transmit up to 2.5Mbps.
U 4 t Slew-Rate-Limited RS-485/RS-422 Low-Power, e e Transceivers h S a t a General ....
w them to transmit up to 2.5Mbps.
U 4 t Slew-Rate-Limited RS-485/RS-422 Low-Power, e e Transceivers h S a t a General .D Description The ILX485 is low-power transceivers for RS-485 and RSw 422 communication. IC contains one driver and one receiver. w The driver slew rates of the ILX485 is not limited, allowing
These transceivers draw between 120µA and 500µA of supply current when unloaded or fully loaded with disabled drivers. All parts operate from a single 5V supply. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit. The MAX485 is designed for half-duplex applications.
m o .c
TECHNICAL DATA
ILX485
Features
Low Quiescent Current: 300µA -7V to +12V Common-Mode Input
Voltage Range Three-State Outputs 30ns Propagation Delays, 5ns Skew Full-Duplex and Half-Duplex Versions Available Operate from a Single 5V Supply Allows up to 32 Transceivers on the Bus Data rate: 2,5 Mbps Current-Limiting and Thermal Shutdown for Driver Overload Protection
w
w
w
t a .D
S a
e h
U 4 t e
ORDERING INFORMATION ILX485N Plastic ILX485D SOIC
.c
m o
w
w
w
.D
a
S a t
e e h
U 4 t
m o .c
1
ILX485
ABSOLUTE MAXIMUM RATINGS
Supply
Voltage (VCC) 12V Control Input
Voltage -0.5V to (VCC + 0.5V) Driver Input
Voltage (DI) -0.5V to...
