HPL5331
3A Bus Termination Regulator
Features
• • • • Provide Bi-direction Current - Sourcing or Sinking Current up to ...
HPL5331
3A Bus Termination Regulator
Features
Provide Bi-direction Current - Sourcing or Sinking Current up to 3A 1.25V/0.9V Output for DDR I/II Applications Fast Transient Response High Output Accuracy - ±20mV over Load, VOUT Offset and Temperature Adjustable Output
Voltage by External Resistors Current-Limit Protection On-Chip Thermal Shutdown Shutdown for Standby or Suspend Mode Simple SOP-8, SOP-8-P with thermal pad, TO-252- 5 and TO-263-5 Packages
General Description (Cont.)
On-chip thermal shutdown provides protection against any combination of overload that would create excessive junction temperature. The output
voltage of HPL5331 track the
voltage at VREF pin. A resistor divider connected to VIN, GND and VREF pins is used to provide a half
voltage of VIN to VREF pin. In addition, an external ceramic capacitor and an opendrain transistor connected to VREF pin provides softstart and shutdown control respectively. Pulling and holding the VREF to GND shuts off the output. The output of HPL5331 will be high impedance after being shut down by VREF or thermal shutdown function.
Pin Configuration
VIN GND
Applications
DDR I/II SDRAM Termination SSTL-2/3 Termination
Voltage Applications Requiring the Regulator with Bi-direction 3A Current Capability
1 2 3 4
8 7 6 5
VCNTL VCNTL VCNTL VCNTL
VOUT VREF VCNTL GND VIN
VREF VOUT
TAB is VCNTL
SOP-8 (Top View)
VIN
TO-252-5 (Top View)
5 4 3 2 1
VOUT VREF VCNTL GND VIN
1 2 3 4
8 7 6 5
NC NC
General ...