SNAP-IN TYPE ALUMINUM ELECTROLYTIC CAPACITORS
HP3 Series
(Warranty of 2,000 hours at 85°C)
Features • Rendered about ...
SNAP-IN TYPE ALUMINUM ELECTROLYTIC
CAPACITORS
HP3 Series
(Warranty of 2,000 hours at 85°C)
Features Rendered about 20% to 30% smaller than the preceding HPR and HFR type predecessor thanks to etching foil magnification increase.
Product Specifications
Items Specifications Temperature range –40°C ~ +85°C Capacitance tolerance ±20% (20°C,120Hz) Rated
voltage 16 ~ 450V.DC 0.02CV (µA) or 3mA, whichever is smaller or less Leakage current [C = nominal capacitance (µF), V = rated
voltage (V)] Dissipation factor Less than the value specified in the standard products table. (20˚C,120Hz) Permissible ripple current As specified in the standard products table. (85˚C,120Hz) High temp. Load life test Others After 85°C, 2000h, rated
voltage (specified ripple current superposition) application Capacitance variation : Initial value ±15% Dissipation factor : 175% of less of specified initial value Leakage current : Not greater than the specified initial value JIS C 5101-4.
Ripple current correction coefficient
Temperature (°C) Correction coefficient Frequency (Hz) Correction 16~100V coefficient 160~450V 40 1.8 50/60 0.7 0.7 60 1.4 120 1.0 1.0 70 1.2 300 1.1 1.1 85 1.0 1K 1.2 1.3
≥10K 1.2 1.4
A continuous load should be avoided over 10 A at the terminal in accordance with the permissible current.
Product symbol : (Example) HP3 Series 16V 10,000µF ±20%
HP3 1C 103
M R X
Case dia code Terminal symbol code Capacitance tolerance code Capacitance code Rated
voltage code Type of series
Ca...