HMC707LP5E

HMC707LP5 / 707LP5E v02.0209 0.5 dB LSB 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 700 - 1200 MHz Typical www.datasheet4u.com Applications Features -2.5 to +29 dB Gain Control in 0.5 dB Steps Power-up State Selection High Output IP3: +38 dBm Low Noise Figure: 0.8 dB TTL/CMOS Compatible Serial, Parallel, or Latched Parallel Control ±0.25 dB Typical Step Error Single +3V and +5V Supply 32 Lead 5x5mm SMT Package: 25mm2 The HMC707LP5(E) is ideal for: Cellular Infrastructure WiBro, WiMAX and LTE/4G Microwave Radio & VSAT Test Equipment and Sensors IF & RF Applications Functional Diagram 13 VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT General Description The HMC707LP5(E) is a digitally controlled variable gain amplifier which operates from 700 MHz to 1200 MHz, and can be programmed to provide between -2.5 dB attenuation and 29 dB of gain, in 0.5 dB steps. The HMC707LP5(E) delivers noise figure of 0.8 dB in its maximum gain state, with output IP3 of up to +38 dBm. The dual mode gain control interface accepts either three wire serial input or 6-bit parallel word. The HMC707LP5(E) also features a user selectable power up state and a serial output for cascading other Hittite serially controlled components. For 1900 MHz applications please refer to the HMC708LP5(E) data sheet. Electrical Specifi cations, TA = +25° C, Rbias = 820 Ohms for Vdd = +5V, Rbias = 4.7k Ohms for Vdd = +3V, Vdd = Vdd1 = Vdd2 Min. Parameter Vdd = +3V Frequency Range Gain (Maximum Gain State) Gain Contro...