GP2010 Datasheet
Part Number |
GP2010 |
Manufacturers |
Mitel Networks Corporation |
Logo |
|
Description |
GPS Receiver RF Front End |
Datasheet |
GP2010 Datasheet (PDF) |
GP2010
GPS Receiver RF Front End
Supersedes edition in August 1996 Global Positioning Products Handbook, HB4305-1.0 DS4056 - 3.4 October 1996
The GP2010 is Mitel Semiconductor second generation RF Front-end for Global Positioning System (GPS) receivers. The GP2010 uses many innovative design techniques and a leading-edge bipolar process to offer a low power, low cost and high reliability RF Front End solution . The GP2010 is designed to operate from either 3 or 5 Volt power supplies. The input to the device is the L1 (1575.42MHz) CoarseAcquisition (C/A) code Global Positioning signal from an antenna (via a low-noise pre-amplifier). The output is 2-bit quantised for subsequent signal processing in the digital domain. The GP2010 contains an on-chip synthesiser, mixers, AGC and a quantiser which provides Sign and Magnitude digital outputs. A minimum of external components is required to make a complete GPS front-end. The device has been designed to operate with the GP2021 12-channel Glob.
Part Number |
GP201MHS18 |
Manufacturers |
Dynex Semiconductor |
Logo |
|
Description |
Low VCE(SAT) Half Bridge IGBT Module |
Datasheet |
GP201MHS18 Datasheet (PDF) |
GP201MHS18
GP201MHS18
Low VCE(SAT) Half Bridge IGBT Module
DS5290-2.1 January 2001
FEATURES
s s s s s
Low VCE(SAT) Non Punch Through Silicon Isolated Copper Baseplate Low Inductance Internal Construction 200A Per Arm
KEY PARAMETERS VCES (typ) VCE(sat) (max) IC (max) IC(PK)
1800V 2.6V 200A 400A
APPLICATIONS
s s s s
11(C2) 1(E1C2) 2(E2)
6(G2) 7(E2) 3(C1) 5(E1) 4(G1)
High Reliability Inverters Motor Controllers Traction Drives Resonant Converters
9(C1)
The Powerline range of high power modules includes half bridge, dual and single switch configurations covering voltages from 600V to 3300V and currents up to 4800A. The GP201MHS18 is a half bridge 1800V, n channel enhancement mode, ins.
Part Number |
GP2015 |
Manufacturers |
Mitel Networks Corporation |
Logo |
|
Description |
GPS Receiver RF Front End |
Datasheet |
GP2015 Datasheet (PDF) |
GP2015
GPS Receiver RF Front End
Supersedes edition in August 1996 Global Positioning Products Handbook, HB4305-1.0 DS4374 - 2.4 October 1996
The GP2015 is a small format RF Front-end for Global Positioning System (GPS) receivers. Equivalent in performance to the GP2010 but in a TQFP package, this product is suited for size-critical applications as the RF area can be reduced by a factor of two to three using miniature surface mount passive components The GP2015 is designed to operate from either 3 or 5 Volt supplies. The input to the device is the L1 (1575.42MHz) CoarseAcquisition (C/A) code Global Positioning signal from an antenna (via a low-noise pre-amplifier). The output is 2-bit quant.
GPS Receiver RF Front End
GP2010
GPS Receiver RF Front End
Supersedes edition in August 1996 Global Positioning Products Handbook, HB4305-1.0 DS4056 - 3.4 October 1996
The GP2010 is Mitel Semiconductor second generation RF Front-end for Global Positioning System (GPS) receivers. The GP2010 uses many innovative design techniques and a leading-edge bipolar process to offer a low power, low cost and high reliability RF Front End solution . The GP2010 is designed to operate from either 3 or 5 Volt power supplies. The input to the device is the L1 (1575.42MHz) CoarseAcquisition (C/A) code Global Positioning signal from an antenna (via a low-noise pre-amplifier). The output is 2-bit quantised for subsequent signal processing in the digital domain. The GP2010 contains an on-chip synthesiser, mixers, AGC and a quantiser which provides Sign and Magnitude digital outputs. A minimum of external components is required to make a complete GPS front-end. The device has been designed to operate with the GP2021 12-channel Global Positioning Correlator, and DW9255 SAW filter, both also available from Mitel Semiconductor. Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
23 24 25 26 27 28 29 30 31 32 33
22 21 20 19 18 17 16 15 14 13 12
34 35 36 37 38 39 40 41 42 43 44
GP2010
GP44
Name
Name IF Output PLL Filter 1 PLL Filter 2 VEE (OSC) VCC (OSC) VEE (OSC) VEE (REG) PRef PReset VEE (IO) CLK MAG SIGN OPC IKOPC IK+ VDD (IO) PDN TEST LD VEE (DIG) AGC AGC +
11 10 9 8 7 6 5 4 3 2 1
Pin 23 24 25 26 27 28 29 3.
2005-03-23 : 2N2857CSM 2N2880 2N2891 2N2894 2N2894 2N2894 2N2894A 2N2894ACSM 2N2894CSM 2N2894DCSM