Compact Transmissive Photointerrupter
www.DataSheet4U.com
GP1S092HCPIF
GP1S092HCPIF
SMT, Gap : 2mm, Slit : 0.3mm Phototransistor Output, Compact Transmissi...
Description
www.DataSheet4U.com
GP1S092HCPIF
GP1S092HCPIF
SMT, Gap : 2mm, Slit : 0.3mm Phototransistor Output, Compact Transmissive Photointerrupter
■ Description
GP1S092HCPIF is a compact-package, phototransistor output, transmissive photointerrupter, with opposing emitter and detector in a molding that provides non-contact sensing. The compact package series is a result of unique technology combing transfer and injection molding. This surface mount device has a shaped positioning pin to assure accurate PCB placement, of the emitter and detector. It is unique, because it is one of the few photointerrupters that comes in Tape and Reel packaging, for use with highly automated pick and place equipment.
■ Agency approvals/Compliance
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of object presence or motion. 2. Example: printer, lens control for camera
■ Features
1. Transmissive with phototransistor output 2. Highlights: Compact Size Positioning Pin “D” shaped to prevent misalignment Surface Mount Type (SMT) Tape and Reel (T&R) 2 000 pcs per reel 3. Key Parameters: Gap Width : 2mm Slit Width (detector side): 0.3mm Package : 4.5×2.6×2.9 mm 4. Lead free and RoHS directive compliant
Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books...
Similar Datasheet