DatasheetsPDF.com

FT200XD Datasheet

Part Number FT200XD
Manufacturers FTDI
Logo FTDI
Description USB I2C SLAVE
Datasheet FT200XD DatasheetFT200XD Datasheet (PDF)

FT200XD USB I2C SLAVE IC Datasheet Version 1.5 Document No.: FT_000628 Clearance No.: FTDI# 265 Future Technology Devices International Ltd. FT200XD (USB I2C SLAVE IC) The FT200XD is a USB to I2C interface with the following advanced features:   Single chip USB to I2C interface.  Up to 3.4MHz, high speed mode, I2C supported   Entire USB protocol handled on the chip. No  USB specific firmware programming required.  Fully integrated 2048 byte multi-timeprogrammable (MTP) memory storing.

  FT200XD   FT200XD






Part Number FT200XD-x
Manufacturers FTDI
Logo FTDI
Description USB I2C SLAVE
Datasheet FT200XD DatasheetFT200XD-x Datasheet (PDF)

FT200XD USB I2C SLAVE IC Datasheet Version 1.5 Document No.: FT_000628 Clearance No.: FTDI# 265 Future Technology Devices International Ltd. FT200XD (USB I2C SLAVE IC) The FT200XD is a USB to I2C interface with the following advanced features:   Single chip USB to I2C interface.  Up to 3.4MHz, high speed mode, I2C supported   Entire USB protocol handled on the chip. No  USB specific firmware programming required.  Fully integrated 2048 byte multi-timeprogrammable (MTP) memory storing.

  FT200XD   FT200XD







USB I2C SLAVE

FT200XD USB I2C SLAVE IC Datasheet Version 1.5 Document No.: FT_000628 Clearance No.: FTDI# 265 Future Technology Devices International Ltd. FT200XD (USB I2C SLAVE IC) The FT200XD is a USB to I2C interface with the following advanced features:   Single chip USB to I2C interface.  Up to 3.4MHz, high speed mode, I2C supported   Entire USB protocol handled on the chip. No  USB specific firmware programming required.  Fully integrated 2048 byte multi-timeprogrammable (MTP) memory storing device  descriptors and CBUS I/O configuration.  Fully integrated clock generation with no  external crystal required plus optional clock  output selection enabling a glue-less interface to external MCU or FPGA.   512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to  allow for high data throughput.   FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in  most cases.   Unique USB FTDIChip-ID™ feature.   Configurable CBUS I/O pin.  Transmit and receive LED drive signals.   USB Battery Charger Detection. Allows for USB peripheral devices to detect the presence of a higher power source to enable improved charging.  Device supplied pre-programmed with unique USB serial number. USB Power Configurations; supports buspowered, self-powered and bus-powered with power switching. Integrated +3.3V level converter for USB I/O. True 3.3VCMOS drive output .


2015-07-25 : 2SD1856    GM5653-02    APM4546J    V07E130P    V10E130P    V14E130P    V20E130P    V07E140P    V10E140P    V14E140P   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)