FPF2701 Datasheet
Part Number |
FPF2701 |
Manufacturers |
ON Semiconductor |
Logo |
|
Description |
AccuPower 0.4A ~ 2A Adjustable Over-Current Protection Load Switches |
Datasheet |
FPF2701 Datasheet (PDF) |
DATA SHEET www.onsemi.com
AccuPower 0.4~2 A Adjustable Over-Current Protection Load Switches
FPF2700, FPF2701, FPF2702
Description The AccuPower FPF270X series is a family of current−limit load
switches that provide full protection to systems and loads from excess current conditions. Minimum current limit is adjustable from 0.4 A to 2.0 A. The FPF270X contains a slew−rate−controlled N−channel MOSFET and slew−rated turn−on to prevent power bus disturbances from being caused by “hot plugging” loads or momentary excess load demands. The input voltage range is 2.8 V to 36 V. Loads can be activated or deactivated with a low−voltage logic−compatible ON pin. Fault conditions can be monitored using the error flag pin and/or the power−good pin.
Each member of the FPF270X family serves a category of load−fault response. All devices clamp the load current so that it cannot exceed an externally programmed current level. An over temperature feature provides further device protection in case of exc.
Part Number |
FPF2701 |
Manufacturers |
Fairchild Semiconductor |
Logo |
|
Description |
Adjustable Over-Current Protection Load Switches |
Datasheet |
FPF2701 Datasheet (PDF) |
FPF2700 / FPF2701 / FPF2702 — AccuPower™ 0.4~2A Adjustable Over-Current Protection Load Switches
December 2013
FPF2700 / FPF2701 / FPF2702 — AccuPower™ 0.4~2 A Adjustable Over-Current Protection Load Switches
Features
2.8 V to 36 V Input Voltage Range Typical RDS(ON)=88 m 0.4 A to 2 A Adjustable Current Limit (Min.) Slew Rate Controlled ESD Protected, above 2000 V HBM Thermal Shutdown Active LOW Enable UVLO Protection Power-Good Output
Applications
Motor Drives Digital Cameras Consumer Electronics Industrial Computing Hard Disk Drives Telecom Equipment
Description
The AccuPower™ FPF270X series is a family of current-limit load switches that provide full p.
AccuPower 0.4A ~ 2A Adjustable Over-Current Protection Load Switches
DATA SHEET www.onsemi.com
AccuPower 0.4~2 A Adjustable Over-Current Protection Load Switches
FPF2700, FPF2701, FPF2702
Description The AccuPower FPF270X series is a family of current−limit load
switches that provide full protection to systems and loads from excess current conditions. Minimum current limit is adjustable from 0.4 A to 2.0 A. The FPF270X contains a slew−rate−controlled N−channel MOSFET and slew−rated turn−on to prevent power bus disturbances from being caused by “hot plugging” loads or momentary excess load demands. The input voltage range is 2.8 V to 36 V. Loads can be activated or deactivated with a low−voltage logic−compatible ON pin. Fault conditions can be monitored using the error flag pin and/or the power−good pin.
Each member of the FPF270X family serves a category of load−fault response. All devices clamp the load current so that it cannot exceed an externally programmed current level. An over temperature feature provides further device protection in case of excessive levels of power dissipation.
FPF2700 responds to an overload condition that lasts longer than a fixed blanking period by turning off the load, followed by a retry after the auto−restart time.
FPF2701 responds to an overload condition that lasts longer than a fixed blanking period by latching off the load. The load remains off unless either the ON pin is toggled or the input voltage cycles through UVLO.
FPF2702 is intended to be used with external fault management. Like the FPF2700 and FPF.
2022-11-24 : NSI45090DDT4G NCV8189 NCP189 FPF2495B FPF2495C FPF2595 NCV47822 FPF2498 MC78M18 MC78M12