FP6716
5V, 8A, 550KHz High Efficiency Low Ripp8l5eT Synchronous Step-Up Converter
Description
The FP6716 is a high effi...
FP6716
5V, 8A, 550KHz High Efficiency Low Ripp8l5eT Synchronous Step-Up Converter
Description
The FP6716 is a high efficiency, fixed frequency 550KHz, current mode PWM boost DC/DC converter which could operate battery such as input
voltage down to 2.5V. The converter output
voltage can be adjusted to a maximum of 5.25V by an external resistor divider. Besides the converter includes a 0.05Ω N-channel
MOSFET switch and 0.08Ω P-channel synchronous rectifier. So no external Schottky diode is required and could get better efficiency near 90%.
The converter is based on a fixed frequency, current mode, pulse-width-modulation PWM controller that goes automatically into PSM mode at light load.
When converter operation into discontinuous mode, the internal anti-ringing switch will reduce interference and radiated electromagnetic energy.
The FP6716 is available in a space-saving SOP-8 (Exposed Pad) package for portable application.
Pin Assignments
SP Package (SOP-8 Exposed Pad)
VIN OUT
FB GND
18
297 3 PGND 6 45
PG LX EN ILIM
Features
High Efficiency up to 90% Low RDS(ON) Integrated Power
MOSFET NMOS 50mΩ/PMOS 80mΩ Wide Input
Voltage Range: 2.5V to 5.5V Fixed 550KHz Switching Frequency Low-Power Mode for Light Load Conditions ±2.0%
Voltage Reference Accuracy Adjustable Current Limit PMOS Current Limit for Short Circuit Protection Low Quiescent Current Output Ripple under 200mV (Scope Full
Bandwidth) Input Under
Voltage Lockout Internal Compensation Functio...